BuddeMix Stirring System 1-4 (PLR compressed air lab stirrers)
This novel stirring system has been conceived to mix low viscosity fluids as well as highly viscous media at slow speeds. Its special design creates inherent dynamic currents to produce perfectly homogeneous mixing results in very little time. Additional components like baffles, bottom bearings, etc. are not needed.
-Your advantages at a glance:
-suitable for low to highly viscous fluids
-stirs media containing solids and fibres without any difficulty
-gentle, low-shear stirring, due to slow stirring speed
-constant product temperature, with no heating effect
-short mixing times as the entire contents of the container are agitated
-no air addition, no foaming
-no baffles required
-low gear wear due to balanced forces
-minimal power consumption thanks to low speeds and short operation times
-easy cleaning
-Particularly for potentially explosive atmospheres:
-a single stirring zone near to the container base ensures easy mixing of settled residues, e.g. in flow-through mixing containers
-no baffles required, thus no additional sources of ignition
Available on request:
-customised shaft length
-fine surface polishing Ra 0.6 to 0.8 µm, except BuddeMix Mini
-certificate of roughness, except BuddeMix Mini
-material certificate 3.1 B
-Your advantages at a glance:
-suitable for low to highly viscous fluids
-stirs media containing solids and fibres without any difficulty
-gentle, low-shear stirring, due to slow stirring speed
-constant product temperature, with no heating effect
-short mixing times as the entire contents of the container are agitated
-no air addition, no foaming
-no baffles required
-low gear wear due to balanced forces
-minimal power consumption thanks to low speeds and short operation times
-easy cleaning
-Particularly for potentially explosive atmospheres:
-a single stirring zone near to the container base ensures easy mixing of settled residues, e.g. in flow-through mixing containers
-no baffles required, thus no additional sources of ignition
Available on request:
-customised shaft length
-fine surface polishing Ra 0.6 to 0.8 µm, except BuddeMix Mini
-certificate of roughness, except BuddeMix Mini
-material certificate 3.1 B
Documents
TypeMaterial
no.Length
mmStirrer Ø
mmShaft Ø
mm
no.Length
mmStirrer Ø
mmShaft Ø
mm
BuddeMix Mini 30Code: 40 26446 00806 2 not in stock1.4404350358
BuddeMix Mini 40Code: 40 26446 00834 5 not in stock1.4404350468
BuddeMix 1Code: 40 26446 00799 7 not in stock1.44043506010
BuddeMix 2Code: 40 26446 00535 1 not in stock1.44043508010
BuddeMix 3Code: 40 26446 00536 8 not in stock1.440455012010
BuddeMix 4Code: 40 26446 00537 5 not in stock1.440485015010
Code: 40 26446 00806 2 not in stock
TypeBuddeMix Mini 30
Material no.1.4404
Length mm350
Stirrer Ø mm35
Shaft Ø mm8
Code: 40 26446 00834 5 not in stock
TypeBuddeMix Mini 40
Material no.1.4404
Length mm350
Stirrer Ø mm46
Shaft Ø mm8
Code: 40 26446 00799 7 not in stock
TypeBuddeMix 1
Material no.1.4404
Length mm350
Stirrer Ø mm60
Shaft Ø mm10
Code: 40 26446 00535 1 not in stock
TypeBuddeMix 2
Material no.1.4404
Length mm350
Stirrer Ø mm80
Shaft Ø mm10
Code: 40 26446 00536 8 not in stock
TypeBuddeMix 3
Material no.1.4404
Length mm550
Stirrer Ø mm120
Shaft Ø mm10
Code: 40 26446 00537 5 not in stock
TypeBuddeMix 4
Material no.1.4404
Length mm850
Stirrer Ø mm150
Shaft Ø mm10
Diagonal blade stirring rotors PSR | |
Propeller stirring rotors PR | |
Anchor stirring rotors AR | |
Double blade stirring rotors DR | |
Dissolver stirring rotors DS | |
Propeller stirring rotors, PTFE-coated |